Chevy Colorado & GMC Canyon banner

SuperMod's v7.00 2016 GMC CANYON SLT Extended Cab Z85 2WD/AWD/4X4

18K views 44 replies 16 participants last post by  Blue15ColoradoLT 
#1 ·
#2 ·
Congrats on the new ride. Now get busy with the 2nd gen Mods!

Interested in purchasing a skid plate for it! :wink:
 
#4 ·
Nice truck, congrats.

What's first on the mod list?
 
#15 ·
Installed American Tonneau hard bed cover





Came with extra goodies.








Used a piece of the tailgate seal to close the bed gap.




Locking the two front clamps is so easy even a cave man can do it!


I took some extra pics to give me an idea where to mount my under the rail LED bed lights.


Holes for running wires. :]


Proud of this Label!


Finished




Good looking cover.
 
#29 ·
Projector Low beam HID Upgrade!

DDM Tuning
Model: Ultra HID Kit
Wattage: 55W
Color Temp.: 5500K
Bulb: H11B
Error Eliminator: BOW3
Filter: 12 amp noise filter



Typical automotive noise filter will help reduce the ballast switching noise from going in to your vehicle electrical system.


Ballast Test Data
Inrush currant (amient): 5 amps @ 15VDC = 75 watts
After 1 minute: 3.60 amps @ 15VDC = 54 watts


H11B Socket




Socket Polarity. I Magic Marker the plug to help denote the correct polarity. Red = (+)12V, Black = (-) Gnd.


Testing


Ballast mounting location. Inner fender shelf.




Now the fun part!




Love the GMC HL's


HID + LED fogs


 
#32 ·
High Beam LED Upgrade

Make: Morimoto
Model: 2STROKE LED
Socket: 9005
LED Emitters: 2x CREE XHP50 per bulb
Kelvin: 6000K
Intensity: 5000lm (raw; per bulb)
Input Power: 34w (per bulb)
Input Voltage: 6-30V DC
Amperage: 2.7A 12VDC



Low Beam HID


Low Beam HID + LED FOG


Low Beam HID + High Beam LED


Video
 
#34 ·
Those morimoto LEDs look incredible! I have some cheap led high beams now, and they cast some strange shadows and light patterns out of the reflector housings, do the morimotos do the same or is it a pretty controlled pattern?
 
#37 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top