i keep getting this message on the screen on the dash board that when i turn my truck on it says abs fault and traction fault and the abs light stays on and the brake light stay on...but the brake is not on...its realeased but it says its on..if somebody knows what it is or an idea i GREATLY APPRECIATE IT
It could be a bad abs sensors thr thing with that is they are a two piece unit one reading the wheel speed and the one in the hub if it is in the hub, the hub must be replaced because they are not servicable. good luck
AEM intake tube. Airrade throttle body spacer. Supermode throttle body. Supermod spring delete. denso plugs. AVT tune.Jet stage 2 chip and custom exhust. and many others
Yeah, It should be a wheel speed sensor (same thing as an ABS sensor) check especially the front two to make sure you didnt get a wire pinched and broke some how, ive seen that too. Make sure that the pigtail is plugged into the hub good and that the ends are not corroded. If that all checks good then its time to replace the hubs.