Any one know of a body lift kit for a 2007 coly z71 2x4. I CANT SEEM TO FIND ANY. Btw will any other year work as well? thanks.
Like this http://www.tonneau-covers-direct.com/4w ... tID=197911





Also will these work for me too http://www.4wheelparts.com/Lift-Kits-Su ... =FABKIT191



Thankyou

As long as the body lift is for any Colorado/Canyon, it should work. Suspension lifts are a different story though. Also, I'm not sure if you thought that the lift in the link above was a body lift or not? I hope you are aware that it isn't.

the one from 4wheelparts is a suspension lift it says i just dont know if it works with me or not cause i dont know if a truck with tbs use spindles. Any help on that would be killer.

This is the kit I put on my truck:

Performance Accessories 10223 - 2008 GMC/CHEVY CANYON / COLORADO 3" BODY LIFT KIT. USE GAP GUARD #6545

Look about half way down the page:
http://www.performanceaccessories.com/newrelease.htm

The Fabtech kit in your second link should work for you since it's made for a 2 wheel drive. What they are calling "spindles" are the blue items in the picture. That's not exactly correct though because those are actually steering knuckles. You'll reuse your existing spindles, which are the shafts on which the hubs/rotors spin. They'll bolt into that big hole in the center of the steering knuckle using the four bolt-holes that surround it.

The only issue I can think of is that since yours is a Z71, you'll want to relocate the TB mounting on the Lower Control Arm, but that's easy enough. Go to Skyjacker's website and look at their directions for their lift kit. You'll see how they just used a simple piece of flat plate to raise the mounting socket. It would be easy to fabricate.