[mexica]

Curious if you have done this yet.

I have. It flexed a little at the edges and we added some support to compensate. Lifts without much if any flex now. It was hard getting someone to do the welding locally who's done rock sliders before. Between a friend and printing photos of what others have done already, I think we have it licked....maybe. The challenge we found at the edges was the way the frame sweeps up, making that piece crucial to whether it flexes.

 

[ready81]

Just wanted to give you guys and update, I'm not ignoring you guys. But i have a promotion board in next two weeks and it's big step to my retirement so I'm really concentrated on studying. As soon as I get a break I'll get back on the build/post....Thanks guys, Lee

 

[RatRacer]

Just wanted to give you guys and update, I'm not ignoring you guys. But i have a promotion board in next two weeks and it's big step to my retirement so I'm really concentrated on studying. As soon as I get a break I'll get back on the build/post....Thanks guys, Lee

Good luck!

 

[Rjsully2]

Got my front shocks in today, Mind measuring your preload adjustment for me?

Also on the site the shock says factory series and the ones i got in the mail say performance racing series...
Do yours say that on them i cant make out in the picture, trying to make sure i got the right ones.

 

[macr88]

Good luck!

^ I agree

Sent from my SAMSUNG-SM-T337A using Tapatalk

 

[ready81]

Not sure where your reading that shock ,post a pic I'll let you know, mine just say fox on reservoirs. Your shocks have to be taking in and measured to level out your truck, my measurements will not matter you have way more weight in the front than me. I will have to readjust mine some as I order the add badger and winch too.

 

[Rjsully2]

Not sure where your reading that shock ,post a pic I'll let you know, mine just say fox on reservoirs. Your shocks have to be taking in and measured to level out your truck, my measurements will not matter you have way more weight in the front than me. I will have to readjust mine some as I order the add badger and winch too.

Right above fox

Sent from my HTC6535LVW using Tapatalk

 

[ready81]

Mine says same

 

[Rjsully2]

Mine says same

awesome just making sure the site picture doesn't say that

Sent from my HTC6535LVW using Tapatalk

 

[Rjsully2]

Found these in another thread. Looks like what you where looking for.

His name is deadly99

Sent from my HTC6535LVW using Tapatalk

 

[ready81]

Yes this guys fab guy is sick....I read same forum!

 

[ready81]

Got the twin arb air compressor in today and wired up.....having problems with photo bucket pics to come. I can air up tires etc....but I still have my 2.5 gallon tank and gauges to run to finish, but for now I have air...

 

[ready81]

 

[lqdchkn]

^^^^That had to be soooooo much easier to mount taking the wheel liner out. I just put my catch can in that location and getting the lower bracket mount to the fender was a PITA to reach.

 

[ready81]

Yes I tried to put a piece of foam between but it was a no go alone and needed longer screws....but it's in well now....what is this catch can?

 

[lqdchkn]

Yes I tried to put a piece of foam between but it was a no go alone and needed longer screws....but it's in well now....what is this catch can?

http://coloradofans.com/forums/226-diesel/343153-group-buy-bms-catch-cans-diesel.html

http://coloradofans.com/forums/226-diesel/343905-how-build-bracket-your-bms-catch-can.html

 

[ready81]

 

[ready81]

Wired the cb today, mounted 2.5 gallon tank in the rear, plumb from air compressor back, I'll finish in the morning, mounted gauge and pressure regulator underneath as well and air chuck in the bed for quick access. Be able to run power tools etc now...

 

[ready81]

 

[ready81]

[/URL